Changing and Washing Covers On The Maxi-Cosi Cabriofix Car Seat

Moe — Mon, 15 Feb 2010 12:05:01 +0000

The Maxi-Cosi CabrioFix is one of the most popular child car seats on the market and deservedly so. It has a removable seat insert to creat a flater lying position for newborn babies and support the head in a sideways direction. When the baby is (approx 4 or 5 months) remove the filling block to make the seat deeper, then you can still use the head support.

Thankfully, when the cover gets messy (depends on your child and what you give them as to how long this takes!) you can remove the cover easily for washing.

Maxi-Cosi Cabriofix

• First remove the belt pads.
• Open the rim at the sun canopy as far as possible.
• Remove the cover from the 8 hooks.
• Remove the cover then from under the hooks and quick adjuster button.
• Pull the buckle tongue sections and adjustment strap through the openings.

Wash according to instructions and refit the cover as follows.

• Just carry out the above instructions in reverse order.
• Make sure that the lower section of the cover flaps over the upper section.
• When closing the rim, make sure the sun canopy is stored properly in the rim.
• Fasten the adjustment strap under the shell again.

Maxi Cosi Cabrio Car Seat Carrier and the Quinny Dreami Carrycot

Moe — Wed, 20 Jan 2010 22:58:38 +0000

Maxi-Cosi Cabrio Car Seat Carrier

Product Features

Test winner! The Maxi Cosi Cabrio Car Seat has the highest recommendation in European Consumer Associations car seat tests Summer 2007 and Best Buy 2009.
You can also install using a 3 point seat belt or with one of the Maxi Cosi bases
Side protection system offers optimal protection against side impact
Sun canopy and a support pillow included

There are several colour ways that exactly match your Quinny Buzz or Speedi Pushchair turning your pushchair into a complete travel system when used with the Quinny Dreami Carrycot (pram base).

The Maxi-Cosi CabrioFix must always be fitted in a rear facing position using a standard 3-point seat belt. NEVER place the Maxi-Cosi on a front seat if an airbag is fitted.

The Maxi Cosi Cabrio Fix is an universal group 0+ child car seat for children up to 13 kg (birth until 12 months).

The Maxi Cosi Cabrio Fix can be used on a forward facing car seat fitted with an automatic or static 3-point seat belt which is approved according to ECE regulation No. 16 or an equivalent standard ( see here for comments about keeping your baby in a rear facing position for as long as possible).

The Maxi Cosi Cabrio Fix can also be used in combination with the Maxi-Cosi EasyFix and the Maxi-Cosi EasyBase for a simple click-in fix straight from your buggy.
Group 0+ For baby’s from 0-13 kg, Birth until approx 12 months.

The maximum internal seat width around hips is 290 mm and the internal seat width around head: 230 mm. The minimum internal seat width (top of head part): 140 mm and the Internal seat depth (max): 310 mm. Internal back length: 500 mm, Height (handle up): 570 mm and the total length is 700 mm. The external width is 440 mm and the weight: 3.25 kg.

The seat conforms to ECE R44/04

Quinny Dreami Carrycot » Maxi-Cosi CabrioFix Car Seat Carrier

Changing and Washing Covers On The Maxi-Cosi Cabriofix Car Seat

Maxi Cosi Cabrio Car Seat Carrier and the Quinny Dreami Carrycot

Product Features